A beautifully prepared and finished hem enhances the look of any garment whether working with knits or woven fabric. In this blog, I'll focus on knit hemming techniques. But because a knit is by nature stretchy, sometimes achieving a nice, flat edge to hem can be challenging.
In a nutshell, here are some of your options:
If the knit doesn't run, some can be left just as the cut edge.
Some knits will do well with a serged/overlocked edge, turned up 1/4" and topstitched.
A decorative (serged) rolled and stretched lettuce edge might be appropriate for some garments.
Perhaps simply folded to the inside and bonded with a fusible web will work for some knits.
Consider using a blind hem for more stable double knits.
Some knits will require stabilizing first - particularly those where the cut edge tends to curl.
Then once turned to the inside could be cover stitched - if you have a cover stitch machine option.
The outcome was just what I intended it to be.
P.S. The side of the hem hikes up slightly on the right side. This was intentional. I inserted shirring elastic on the right side seam only which results in a slight asymmetrical drape at the hem - all part of the plan!
And though I don't (currently) have photos of all options, let's take a look..
This is a slinky-type jacquard knit. The drape is lovely, it has a beautiful hand and is a stable knit - meaning it does not run. Because the hem goes up and down and up and down, it would have made it challenging to sew even a narrow 1/4" turned hem.
The solution - leave the cut edge as is.
Here's a close-up of the cut edge. (I wish I'd bought more of this fabric in different colors - hind sight is always 20/20).
This is a much thinner knit where the edge is beginning to curl.
Some knits curl considerably more than this example.
Even though this next knit wasn't particularly 'curly', the fabric itself is quite thin and for a really nice hem, I stabilized it. I'll show you how.
This is a 1 1/4" wide strip of iron-on fine, fusible interfacing which I fused to the inside of the hem edge, after I trimmed it down to 1" wide.
f you don't have a pre-cut roll of fusible interfacing, you can cut your strips from yardage. This roll is pre-cut at 1 1/4" wide. I wanted a 1" wide hem, so I very carefully trimmed away 1/4".
Then press the 1" hem toward the wrong side.
I used the Cover Stitch option on my BabyLock Evolution. This is what the inside looks like.
I love this Cover Stitch option. As long as your hem is perfectly lined up, the result is 2 perfectly spaced rows of stitching...just like in ready-to-wear. And by having added the fusible interfacing at the edge of the hem, the fabric laid flat and stable throughout the stitching process.
Knit Tip: How to Hem Knits...Happy Hemming!
4 Free Getting-Started Gifts with Subscription
- Instructions for this 'Pretty in Peach Princess Jacket' design
- Instructions for the Color-Blocked T-Shirt
- 4-pg. essential Guide to Sewing Notions
- Drawing tool - Designer's Companion (with 1st order)
You will receive an email asking your to confirm your subscription. (Watch for this in your email Inbox. If it's not there, check your Junk/Spam folder). Then you'll be directed to the Subscription Gifts page where you can choose 1 or more of the Welcome Gifts (see revolving carousel below).
No Spam - Total Privacy - Unsubscribe at any time
To see what the Designer's Companion is used for and how it is different from the Designing Stylus, please click here. PO Box 5698, Eugene, OR 97405 USA (541)344-0422 firstname.lastname@example.org Copyright © 2010-2015, Ranita Corporation, Eugene, OR
**Note** You are currently in the SFD Learning Center. All links below will take you back to the main Sure-Fit Designs website and will open up in a new browsing window.